Experience unparalleled precision and reliability in your aiming with the Trijicon RMR Type 2 3.25 MOA Adjustable LED Red Dot Sight, a state-of-the-art optical solution engineered for tactical superiority in any shooting scenario. Renowned for its rugged construction, advanced features, and exceptional performance, this red dot sight empowers shooters with unmatched accuracy, speed, and confidence on the range or in the field.

Crisp and Clear Optics: The standout feature of the Trijicon RMR Type 2 Red Dot Sight is its crisp and clear optics, providing shooters with a high-contrast aiming point that ensures quick and precise target acquisition in any lighting condition. Whether in bright daylight or low-light environments, the LED illumination delivers a bright and sharp red dot that stands out against backgrounds, allowing for rapid and instinctive aiming with both eyes open.

Adjustable MOA Dot: With a 3.25 MOA (Minute of Angle) red dot reticle, this sight offers shooters the perfect balance of precision and speed for close-quarters engagements and extended-range shots. The adjustable brightness settings allow for customization to match ambient light conditions, ensuring optimal visibility and contrast for maximum accuracy and effectiveness in any shooting scenario.

Rugged Durability: Built to withstand the rigors of tactical use, the Trijicon RMR Type 2 Red Dot Sight features a ruggedized construction that ensures durability and reliability in the harshest environments. Constructed from aircraft-grade aluminum alloy, this sight is shockproof, waterproof, and fog-resistant, providing shooters with a reliable aiming solution that performs flawlessly under adverse conditions without compromising accuracy or functionality.

Battery Conservation: Equipped with advanced LED technology and a motion-sensing auto-adjustment feature, this red dot sight maximizes battery life without sacrificing performance. The innovative design automatically adjusts the brightness of the reticle based on ambient lighting conditions and motion, conserving battery power during periods of inactivity and extending the operational lifespan of the sight for extended use in the field.

Versatile Mounting Options: Compatible with a wide range of mounting solutions, including pistol slides, rifle mounts, and aftermarket adapters, the Trijicon RMR Type 2 Red Dot Sight offers versatility and adaptability for use on a variety of firearms platforms. Whether mounted on a handgun for personal defense or on a rifle for tactical operations, this sight provides shooters with a reliable aiming solution that enhances accuracy and confidence in any shooting scenario.

In conclusion, the Trijicon RMR Type 2 3.25 MOA Adjustable LED Red Dot Sight sets the standard for precision, durability, and performance in the world of tactical optics. With its crisp optics, adjustable MOA dot, rugged durability, battery conservation features, and versatile mounting options, this sight offers shooters unmatched accuracy, reliability, and confidence in their aiming capabilities. Whether used by military personnel, law enforcement officers, or civilian shooters, the Trijicon RMR Type 2 Red Dot Sight delivers the tactical advantage needed to dominate the competition and achieve mission success in any shooting environment

I bought a Trijicon RMR Type 2 sold and fulfilled by Amazon prime. It is a great single-plane 1x optic for a pistol. This second gen RMR is smaller than Type 1, and has an improved LED system. I initially put mine on an FN 509. The smaller Type 2 RMR is great for everyday legal CCW. You will not know its there until you use it. I put a second Identical RMR on a GEN 5 M45 9 mm Glock pistol.

I found the optic simple to operate, easy to manually adjust to zero, easy to adjust reticle brightness. , and a pleasure to use.

Increasing brightness appears to dramatically increase the size of the red dot reticle, dimming the reticle appears to reduce the size of the reticle. On a duty weapon, you will probably want larger than 3.25 MOA, but if you already have the 3.25, adjust the reticle brightness up for a big and bright red dot to make it easy to find the dot when you draw.

Acquiring a sight picture with the red dot RMR works best with both eyes open. Just drop the muzzle down as you normally would to find the front sight on the target, and let your dominant eye pick up the red dot in the optic. With your non- dominant eye open you will maximize your peripheral vision and depth perception. The key is Put the dot on the intended point of impact and operate the trigger. Thats it, no need to align front and rear fixed sights. The Type 2 RMR improved the performance of the LED, but consider having a set of suppressorheight tritium phosphor sights on your pistol so, if the battery should fail when need to use your pistol, you can co-witness your fixed sights through the 1x RMR optic.

That Trijicon knows the single plane optic is readily apparent when, for example, you see that the RMR obviates the need for hold-over within the effective range of a 9mm or .a 45. pistol. Also, if you are like me, far-sighted and normally need reading glasses to see the front sight of a pistol, you may find as I did that with a 1x RMR optic on a pistol, you can see the front sight fine without need reading glasses. Also, without reading glasses, I can see the red dot in the optic clearly and can see to “co-witness” the fixed sights should the battery loose power.The two attached photographs show silhouette targets that I shot at 15 yards and 75 yards with this RMR mounted on a Gen.5 Glock M45 9 mm pistol.

Without a doubt, this optic has greatly improved my marksmanship. Its also a lot of fun to shoot steel targets with, and tighter shot groups on paper targets.

I highly recommend the Trijicon RMR Type 2 optic for a handgun. Excellent every-day carry gear. Its made combat tough, too. Its worth the money.

Excellent RMR: 9mm S&W Performance Center & 10mm Springfield TRP RMR

First, I make sure that the product I purchase only comes from the best sellers–in this case, the best on the planet ‘Ships from and sold by Amazon.com.’ and then I don’t have to worry about knock-offs and rubbish vs. the real thing. In this case, given all the reviews about fake RMR’s, I also compared the RMR that came from Amazon to the one that came OEM on my 10mm Springfield TRP RMR, which has over +500 full power loads and no RMR problems. The RMR 3.5 is easy to see, you can adjust the brightness a bit if you want more or less light, and it keeps its 0. I like the smaller dot that allows for higher accuracy. This is my 4th Trijicon RMR and it works great on any handgun. It makes making fast accurate shots with both full power 10mm, regular 45 ACP, and 9mm so much easier. I can easily make large holes at 25 yards even with my 10mm. Highly recommended. BTW – also get the small Trijicon brush to clean the

Was scared thinking was going to get a Chinese knockoff especially seeing WestCost Security look more and more like Alibaba everyday. But from what I can tell it’s the real deal.

if you are like me, far-sighted and normally need reading glasses to see the front sight of a pistol, you may find as I did that with a 1x RMR optic on a pistol, you can see the front sight fine without need reading glasses.

The sight is very clear and the dot is easy to see. But I was accustomed to iron sights so it takes some getting used to with respect to quick sight acquisition; I’m working on that.

Get the Trijicon RMR Mount Sealing Plate !

I put this on a SIG P220 Match Stainless Elite. Neither SIG nor the mainstream vendors make a mounting plate so do that I had to have a custom mounting plate made (by Amerigun USA).

Some of the reviews make this look sketchy.
But i see one consistent in them.

It was one seller and probably with the best price that was selling the fakes.

That seller has been kicked off.
I bought mine where the seller is amazon.

It came, and passed all of the various “is it a fake” tests.
The final, register it with trijicon.
Result = Pass!

I bought this to replace a vortex that came with my 509, that vortex wouldn’t hold a zero to save it’s own life.

I feel like it was just a bad one, however i needed something i could trust my life with, so i decided to go with the trusted trijicon.

It’s a pretty neat sight, so far the auto brightness feature is working well for me.

It’s also kind of a pain to shut the site off, i can imagine it would be impossible if you didn’t have a strong enough grip to press both buttons at the same time.

WestCost Security. You guys made it right and I would love to slam the seller as it was shipped by them but the system will not allow for some reason.Trijicon RMR is a probably a great unit, I gave them a 5 because I have a ACOG 4×32 and it works great and it’s real. Good luck.